We offer a second to none service in the delivery of steel structure across the West African Region. We supply steel for any kind of project, from small residential extensions to multi-storey developments and everything in-between, always striving to deliver your steel just when you need it.
The steel structure frame consists of the Universal Steel beam, Universal steel column, RSJs (lintels or girders), Flange Channels, Wall Studs and Roof Z purlin, Angles, and Designed Gutter, which is made up the main structure and frame for the building.
The wall and roof panel which covers all around of the building, can be used by the steel panel or sandwich panel. Steel sheet panel is easy to transport and install, and with even lower cost, while the sandwich panel consists of the EPS panel, PU panel, and rock wool panel, which is with the high efficiency of heat preservation (can install the air conditioner)
TEG GHANA STEEEL STRUCTURES
Also known as: Girders, H sections, I sections, U beams, Lintels
Whatever size you require, our universal steel beams are fabricated to our exacting design standards.
Click image for detail>
Whatever size you require, our universal steel beams are fabricated to our exacting design standards.
Click image for detail>
We offer fabricated columns to meet our client specifications, whether it’s for a small building project or large-scale site construction. Choose from one of the sizes below, or call us and speak to an advisor for help.
Universal column sizes and weights
Click image for detail>
Click image for detail>
In addition to steel beams, we offer rolled steel joists (RSJs) in the most in-demand sizes and weights.
Please search the table below to find what you need, or call us if you require advice choosing.
Click image for detail>
Please search the table below to find what you need, or call us if you require advice choosing.
Click image for detail>
We carry both equal and unequal angles. See the tables below for specifications.
Click image for detail>
Click image for detail>
Including: U channels, C sections, mild steel channels
Manufactured to the precise sizes and weights below, our PF Channels are suitable for a range of uses in residential and commercial builds.
Click image for detail>
Manufactured to the precise sizes and weights below, our PF Channels are suitable for a range of uses in residential and commercial builds.
Click image for detail>
We have round, rectangular or circular steel hollow sections in stock. You can also purchase the sections in mild steel which can be drilled or cut to make welding easier.
Could be available in 10.1 or 12.0 meter lengths, Hollow Sections may be Cold Rolled or Hot finished, we would normally supply Hot / Cold Formed.
Click image for detail>
Could be available in 10.1 or 12.0 meter lengths, Hollow Sections may be Cold Rolled or Hot finished, we would normally supply Hot / Cold Formed.
Click image for detail>
Plates less than 2mm thick will normally be supplied to BS EN 10111 HR4 as standard. Plates over this thickness will normally be supplied to BS EN 10025 S275 JR.
We provide steel plates as specified in the table below, as well as de-coiled to length from standard width coil, and as sheared blanks (see shearing section for more details). In addition to this, we also offer special plate as preformed stair treads.
Click image for detail>
We provide steel plates as specified in the table below, as well as de-coiled to length from standard width coil, and as sheared blanks (see shearing section for more details). In addition to this, we also offer special plate as preformed stair treads.
Click image for detail>
